Payment & Shipping Terms:
|Capacity:||50-500KG Per Batch||Applicable Processing Products:||Stainless Steel Based Alloys, Hard Alloys, High Temperature Alloy, Etc. Temperature Alloy, Etc.|
|Heating Zone:||Three Zones||Temperature Controlling Method:||PID|
|Max. Working Temperature:||1400°C||Heating Material:||Graphite|
high temperature sintering furnace,
vacuum quenching furnace
Vacuum Heat Treatment Furnace Vacuum High Pressure Gas Quenching Furnace
This furnace is mainly used for vacuum quenching of tool steel and alloy steel, and vacuum tempering and vacuum annealing of other materials, etc..
|Applicable processing products||
stainless steel based alloys, hard alloys, high temperature alloy, etc.
temperature alloy, etc.
|Rated heating power||
260KW (The actual power is adjustable, subject to the final design)
|Power supply voltage||380V 50Hz|
|Heating zone||three zones|
|Temperature controlling method||PID|
|Max. working temperature||1400°C|
|Common working temperature||≤1320°C|
|Working zone size||900*900*1200mm(W*H*L)|
|Cooling method||axial flow fan pressure cooling or water cooling in furnace (centralized water supply & drainage)|
|Ultimate vacuum degree of unloaded furnace in cold state||10-4mbar|
|Pressure rising rate||≤0.67Pa/h|
|Rated pressure of pneumatic valve gas source||0.6-0.8MPa|
|Furnace temperature uniformity||±5°C|
|Gas pressure constant sintering||adjustable|
|Cooling water pressure||0.1-0.3Mpa|
3. Basic Configuration
4. Documents in the delivery
|1||Operation manual of EF-VGQ-9912||1 copy|
|2||Qualification certificate of EF-VGQ-9912||1 copy|
|3||Operation manual of temperature controller||2 copies|
|4||Operation manual of voltage regulator||2 copies|
|5||Maintenance instruction of EF-VGQ-9912||1 copy|
|6||Furnace general size diagram||1 copy|
|7||Electric control cabinet circuit diagram||1 copy|
|8||Working diagram of wearing part||1 copy|
1. How can I know your factory can produce equipment I need?
Re: Contact us and let us know your requirements of equipment. Then we will send these requirements to our technical department. So we will know whether our factory can offer you equipment or not.
2. Does your company customize equipment for customer?
Re: Yes, we can customize equipment according to customers' requirements.
4. How can I believe your quality?
Our equipment are eqquiped with mechanical parts of world renowned brands like Schneider, Omron and so on, and also approved ISO9001 certification.
Contact Person: Vivian