Payment & Shipping Terms:
|Capacity:||50-500KG Per Batch||Applicable Processing Products:||Stainless Steel Based Alloys, Hard Alloys, High Temperature Alloy, Etc. Temperature Alloy, Etc.|
|Heating Zone:||Three Zones||Temperature Controlling Method:||PID|
|Max. Working Temperature:||1400°C||Heating Material:||Graphite|
380V Roller Hearth Heat Treatment Furnace,
260KW Heat Treatment Furnace,
PID control roller hearth furnace
1.Can provide roller hearth heat treatment furnace for plate, graders, pipe, bar etc;
2.According to technical requirements, can provide protective atmosphere, fire atmosphere heat treatment furnaces,for the protective atmosphere, optional adopts seal blinds, vacuum lock chamber and other sealing devices;
3.Can equip with sub high speed burner, self-preheat burner and other combustion equipment;
4.Radiant tube temperature uniformity, small temperature difference between the surface;
5.Furnace temperature control system using pulsed or continuous proportional control system.
|Applicable processing products||
stainless steel based alloys, hard alloys, high temperature alloy, etc.
temperature alloy, etc.
|Rated heating power||
260KW (The actual power is adjustable, subject to the final design)
|Power supply voltage||380V 50Hz|
|Heating zone||three zones|
|Temperature controlling method||PID|
|Max. working temperature||1400°C|
|Common working temperature||≤1320°C|
|Working zone size||900*900*1200mm(W*H*L)|
|Cooling method||axial flow fan pressure cooling or water cooling in furnace (centralized water supply & drainage)|
|Ultimate vacuum degree of unloaded furnace in cold state||10-4mbar|
|Pressure rising rate||≤0.67Pa/h|
|Rated pressure of pneumatic valve gas source||0.6-0.8MPa|
|Furnace temperature uniformity||±5°C|
|Gas pressure constant sintering||adjustable|
|Cooling water pressure||0.1-0.3Mpa|
3. Basic Configuration
4. Documents in the delivery
|1||Operation manual of EF-VGQ-9912||1 copy|
|2||Qualification certificate of EF-VGQ-9912||1 copy|
|3||Operation manual of temperature controller||2 copies|
|4||Operation manual of voltage regulator||2 copies|
|5||Maintenance instruction of EF-VGQ-9912||1 copy|
|6||Furnace general size diagram||1 copy|
|7||Electric control cabinet circuit diagram||1 copy|
|8||Working diagram of wearing part||1 copy|
1. How can I know your factory can produce equipment I need?
Re: Contact us and let us know your requirements of equipment. Then we will send these requirements to our technical department. So we will know whether our factory can offer you equipment or not.
2. Does your company customize equipment for customer?
Re: Yes, we can customize equipment according to customers' requirements.
3. How can I believe your quality?
Our equipment are eqquiped with mechanical parts of world renowned brands like Schneider, Omron and so on, and also approved ISO9001 certification.
Contact Person: Yulia